|
| The CP6000 built-in Control Panels are designed
for installation in the control cabinet. All CP7000 series
Control Panels are now also available as built-in devices.
Only 4 mm of the front are visible in front of the control
cabinet wall. Installation is via pull-out clamping levers,
making the process very simple. There are no loose parts.
The CP6000 built-in Control Panels are available with 6.5,
10, 12, 15, 18 or 20 inch TFT display, with touch screen or
touch pad, as monitor without keypad or with different membrane
keypad models up to full alphanumeric keyboards with 10 special
PLC keys and 10 LEDs. The same range of push-button extensions
with electromechanical keys is available as for the CP7000
series.
The built-in Control Panels are optionally available with
DVI/USB interface for distances of up to 5 m away from the
PC or with CP-Link interface for distances of up to 100
m away from the PC. In combination with the add-on PC CP6x00,
you have a powerful built-in Industrial PC. |
| |
|
Control Panel CP6800 with DVI/USB
interface
 In addition
to the proven Beckhoff CP-Link connection between a Control
Panel and the PC, now, a standard USB and DVI interface can
be used to interface to a Control Panel. The Digital Visual
Interface (DVI), defined as VGA successor standard, transfers
the image the the LC display. The Universal Serial Bus, USB,
permits connection of Control Panels components as mouse or
keyboard to the PC. For distances up to 5 metres (15 ft.),
all Beckhoff Control Panels of the CP60xx and CP70xx series
are available with the cost efficient DVI/USB interface as
CP68xx and CP78xx as an alternative to the CP-Link connection.
Only a „commercial of the shelfˇ° AGP graphic card with
DVI output and a USB port available on every motherboard are
build the interface, no additional plug-in card is required
in the PC. Windows 2000 and Windows XP is ideally suited for
operation of the Control Panel via the DVI/USB connection.
Special keys are supported via TwinCAT driver software. |
|
